Gr2 Pure Titanium Bar are commonly used in applications that require superior corrosion resistance in various aggressive media. These Gr2 Pure Titanium Bars are widely used in bellows, honeycombs, seals, aircraft structures, aircraft skins, parts for heat exchangers, etc. Gr 2 round titanium posts are the softest and most ductile of the types, where they continue to be used due to their high corrosion resistance. The high strength, low weight ratios, and excellent corrosion resistance of these Gr2 Pure Titanium Bars have resulted in a wide and varied range of successful applications that require a high level of reliable performance.
Our Comparative Advantages:
Advanced detection equipment such as Ultrasonic flaw detection, infra-red apparatus, turbine detector
Considerate after-service
Precautions For Using Gr2 Pure Titanium Bar:
1. When using titanium rods, care should be taken to avoid scratches and collisions, and also pay attention to dust and oil stains.
2. The working pressure of the medium titanium rod cannot exceed the rated working pressure.
3. In normal use, at least 3-5 minutes of low-pressure start-up time, the relative pressure difference should be controlled below 0.5Mpa, and then gradually adjust the working pressure to the normal needs (higher pressure does not exceed 0.4Mpa)
4. After a certain period of operation of the titanium bar, the filter element may be clogged, which causes the pressure to increase and the flow rate to decrease, which requires backwashing or backwashing regeneration.
Mechanical Properties (ASTM B348)
Chemical Component (WT%)
For more information on Gr2 Pure Titanium Bar, please contact us.
Email: mira@xjcmetal.com
